| View previous topic :: View next topic |
| Author |
Message |
raulhp
Joined: 29 Sep 2008 Posts: 6 Location: Madrid, Spain
|
Posted: Wed Dec 30, 2009 5:57 am Post subject: Nissan SR20det (s14) idle problems |
|
|
Hi
I have another customer with an hydra on his S14....i know the ISC data is tested by you and I dont need modify them (in other models i had not do it)
But in this car, the idle is not stable, and will stall the engine when the car stalls on red light..
Can you say me a basic setup (steps) to get a decent idle? I think the ISC screw would not be in correct position because the engine was rebuilt
The problem is that my customer is about 600milles from me, and the tune only can be done on saturdays (my customer job problem), this is the reason why i dont have too much time to spend
The hydra is a R15 version with R15 tuning program version |
|
| Back to top |
|
 |
HydraEMS-NA Site Admin
Joined: 18 Oct 2004 Posts: 566
|
Posted: Sun Jan 03, 2010 5:06 pm Post subject: |
|
|
| I suggest you send us a copy of the map from that car to techsupport@hydraems.com |
|
| Back to top |
|
 |
raulhp
Joined: 29 Sep 2008 Posts: 6 Location: Madrid, Spain
|
Posted: Mon Jan 04, 2010 10:23 am Post subject: |
|
|
Many thanks
I will go to tune this car next saturday, if i can not tune the idle correctly after modify the PID controls i will send you the copy |
|
| Back to top |
|
 |
|