| View previous topic :: View next topic |
| Author |
Message |
Meikko
Joined: 24 Feb 2006
Posts: 5
|
 Posted: Tue May 16, 2006 8:24 pm Post subject: 2006 Si |
 |
|
Any news or updates on the 2006 Si ECU?
Meikko
jmanoah@gmail.com |
|
| Back to top |
|
 |
HydraEMS-NA
Site Admin
Joined: 18 Oct 2004
Posts: 566
|
| Posted: Sat May 20, 2006 1:37 pm Post subject: |
|
|
| We have the ecu that will be able to control the Motor. However we have not seen what the ECU header plug likes like so we are not sure how soon we can get a PNP model out.If you can take a picture of the Factory ECU with the Header plug exposed. Email it to us at americasales@hydraems.com and we will see what we can do. |
|
| Back to top |
|
|
Meikko
Joined: 24 Feb 2006
Posts: 5
|
| Posted: Fri May 26, 2006 11:36 pm Post subject: |
|
|
| email sent |
|
| Back to top |
|
|
phantomsi
Joined: 05 Jan 2009
Posts: 2
|
| Posted: Wed Jan 07, 2009 4:35 pm Post subject: |
|
|
| Are there any updates or etas on this application? |
|
| Back to top |
|
|
HydraEMS-NA
Site Admin
Joined: 18 Oct 2004
Posts: 566
|
| Posted: Tue Jan 20, 2009 8:58 am Post subject: |
|
|
| Sorry we are still working on this application. We are working on the CAN interface to make the system a complete stand-alone. |
|
| Back to top |
|
|
phantomsi
Joined: 05 Jan 2009
Posts: 2
|
| Posted: Tue Jan 20, 2009 6:53 pm Post subject: |
|
|
| I heard somewhere before that a tuning system is available but has to be used in conjunction with the stock ecu which controls the gauge functions and others. Is this true? |
|
| Back to top |
|
|
HydraEMS-NA
Site Admin
Joined: 18 Oct 2004
Posts: 566
|
| Posted: Fri Jan 23, 2009 4:20 pm Post subject: |
|
|
| At one point we were planning on releasing the system as a parallel unit. However we have changed our plans and the unit will be offered as a complete standalone unit with Full CAN bus capability. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
